Where To Go Next; Configuring An Internal Querier - Cisco ASR 9000 Series Configuration Manual

Configuring an Internal Querier

Command or Action
Step 6
show igmp snooping profile profile-name detail
Example:
RP/0/RSP0/CPU0:router# show igmp snooping profile
host-port-profile detail

Where to Go Next

Attach the profile to bridge domains or ports to complete static-group configuration. See one of the following
sections:
Configuring an Internal Querier
Before You Begin
IGMP snooping must be enabled on the bridge domain for this procedure to take effect.
SUMMARY STEPS
1. configure
2. igmp snooping profile profile-name
3. system-ip-address ip-addr
4. internal-querier
5. commit
6. show igmp snooping profile profile-name detail
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 igmp snooping profile profile-name
Example:
RP/0/RSP0/CPU0:router(config)# igmp snooping
profile internal-querier-profile
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
32
Implementing Layer-2 Multicast with IGMP Snooping
Purpose
(Optional) Displays the configuration settings in the
named profile.
Purpose
Enters IGMP snooping profile configuration mode and
creates a new profile or accesses an existing profile.