Preventing Auto-Rp Messages From Being Forwarded On Software: Example; Inheritance In Msdp On Software: Example - Cisco ASR 9000 Series Configuration Manual

Preventing Auto-RP Messages from Being Forwarded on Software: Example

bps_in /pps_in /bps_out /pps_out
N/A / N/A / N/A / N/A
(10.0.70.2,225.0.0.0)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.1)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.2)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.3)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.4)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.5)
bps_in /pps_in /bps_out /pps_out
22649 / 50 / 22951 / 50
(10.0.70.2,225.0.0.6)
bps_in /pps_in /bps_out /pps_out
Preventing Auto-RP Messages from Being Forwarded on Software: Example
This example shows that Auto-RP messages are prevented from being sent out of the GigabitEthernet interface
0/3/0/0. It also shows that access list 111 is used by the Auto-RP candidate and access list 222 is used by the
boundary command to contain traffic on GigabitEthernet interface 0/3/0/0.
ipv4 access-list 111
10 permit 224.1.0.0 0.0.255.255 any
20 permit 224.2.0.0 0.0.255.255 any
!
!Access list 111 is used by the Auto-RP candidate.
!
ipv4 access-list 222
10 deny any host 224.0.1.39
20 deny any host 224.0.1.40
!
!Access list 222 is used by the boundary command to contain traffic (on
GigabitEthernet0/3/0/0) that is sent to groups 224.0.1.39 and 224.0.1.40.
!
router pim
auto-rp mapping-agent loopback 2 scope 32 interval 30
auto-rp candidate-rp loopback 2 scope 15 group-list 111 interval 30
multicast-routing
interface GigabitEthernet0/3/0/0
boundary 222
!

Inheritance in MSDP on Software: Example

The following MSDP commands can be inherited by all MSDP peers when configured under router MSDP
configuration mode. In addition, commands can be configured under the peer configuration mode for specific
peers to override the inheritance feature.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
254
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software