Cisco ASR 9000 Series Configuration Manual page 133

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
• Configuring VPN ID
The configuring VPN ID procedure is needed for profiles 1 and 9 (Rosen MLDP).
• Configuring MVPN Routing and Forwarding instance
For profile 1 (MLDP Rosen), the mdt default mldp ipv4 command and for profile 4/5 (MS- PMSI with
BGP-AD), the mdt partitioned mldp ipv4 mp2mp/p2mp command are configured.
• Configuring the Route Distinguisher
• Configuring Data MDTs (optional)
• Configuring BGP MDT address family
• Configuring BGP vpnv4 address family
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
◦ vrf vrf_name
◦ address-family ipv4/ipv6 unicast
◦ import route-target route-target-ext-community
◦ export route-target route-target-ext-community
◦ configure
◦ vrf vrf_name
◦ vpn id vpn_id
◦ configure
◦ multicast-routing vrf vrf_name
◦ address-family ipv4
◦ mdt default mldp ipv4 root-node
◦ configure
◦ router bgp AS Number
◦ vrf vrf_name
◦ rd rd_value
◦ configure
◦ multicast-routing vrf vrf_name
◦ address-family ipv4
◦ mdt data <1-255>
◦ configure
◦ router bgp AS Number
◦ address-family ipv4 mdt
◦ configure
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
119