Configuring Route-Policy - Cisco ASR 9000 Series Configuration Manual

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software

Configuring route-policy

SUMMARY STEPS
1. configure
2. route-policy policy-name
3. set rpf-topology vrf default
4. end-policy
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
route-policy policy-name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy policy1
Step 3 set rpf-topology vrf default
Example:
RP/0/RSP0/CPU0:router(config-rpl)# set rpf-topology
vrf default
Step 4
end-policy
Example:
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
Step 5 commit
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Configuring route-policy
Purpose
Defines a route policy.
Sets the PIM RPF topology attributes for the
default VRF.
Ends the route-policy definition configuration.
251