Where to Go Next
Where to Go Next
Cisco 1710 Security Router Software Configuration Guide
1-12
Now that you have learned some Cisco IOS software basics, you can begin to
configure your router.
Remember that
You can use the question mark (?) and arrow keys to help you enter
•
commands.
Each command mode restricts you to a set of commands. If you are having
•
difficulty entering a command, check the prompt, and then enter the question
mark (?) for a list of available commands. You might be in the wrong
command mode or using the wrong syntax.
If you want to disable a feature, enter the keyword no before the command;
•
for example, no ip routing.
You need to save your configuration changes to NVRAM so that they are not
•
lost if there is a system reload or power outage.
Chapter 1
Introduction to Router Configuration
78-12696-01