Where To Go Next - Cisco IE 3000 Software Configuration Manual

Table of Contents

Advertisement

Chapter 1
Overview
Cell Network—Redundant-Star Topology
In a redundant-star topology, every Layer 2 access switch has dual connections to a Layer 3 distribution
switch. Devices are connected to the Layer2 switches. See
Figure 1-4
3000
Human
Machine
Interface

Where to Go Next

Before configuring the switch, review these sections for startup information:
OL-13018-01
Any Layer 2 switch is always only two hops to another Layer 2 switch.
In the Layer 2 network, each switch has dual connections to the Layer 3 devices.
The Layer 2 network is maintained even if multiple connections are lost.
Cell Network–Redundant Star Topology
Catalyst 3750
Stackwise
Switch
Stack
IE
(HMI)
Controllers, Drives,
and Remote I/O
Cell Zone
Chapter 2, "Using the Command-Line Interface"
Chapter 4, "Assigning the Switch IP Address and Default Gateway"
Figure
1-4.
Cisco IE 3000 Switch Software Configuration Guide
Where to Go Next
1-19

Advertisement

Table of Contents
loading

Table of Contents