Cisco ASR 9000 Series Configuration Manual page 83

Implementing MLD Snooping
2 Configure two MLD snooping profiles.
3 Configure interfaces as bundle member links.
4 Configure the bundle interfaces for L2 transport.
interface Bundle-Ether 1
5 Add the interfaces to the bridge domain and attach MLD snooping profiles.
6 Verify the configured bridge ports.
show mld snooping port
interface GigabitEthernet0/0/0/3
channel-group 1 mode on
!
mld snooping profile bridge_profile
!
mld snooping profile port_profile
mrouter
!
interface GigabitEthernet0/0/0/0
bundle id 1 mode on
negotiation auto
!
interface GigabitEthernet0/0/0/1
bundle id 1 mode on
negotiation auto
!
interface GigabitEthernet0/0/0/2
bundle id 2 mode on
negotiation auto
!
interface GigabitEthernet0/0/0/3
bundle id 2 mode on
negotiation auto
!
l2transport
!
!
interface Bundle-Ether 2
l2transport
!
!
l2vpn
bridge group bg1
bridge-domain bd1
mld snooping profile bridge_profile
interface bundle-Ether 1
mld snooping profile port_profile
interface bundle-Ether 2
!
!
!
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Configuring MLD Snooping on Ethernet Bundles
69