Cisco ASR 9000 Series Configuration Manual page 37

Implementing Layer-2 Multicast with IGMP Snooping
SUMMARY STEPS
1. configure
2. l2vpn
3. bridge group bridge-group-name
4. bridge-domain bridge-domain-name
5. igmp snooping profile profile-name
6. commit
7. show igmp snooping bridge-domain detail
8. show l2vpn bridge-domain detail
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Step 3 bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge
group GRP1
Step 4 bridge-domain bridge-domain-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg)#
bridge-domain ISP1
Step 5 igmp snooping profile profile-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# igmp
snooping profile default-bd-profile
Step 6 commit
Step 7 show igmp snooping bridge-domain detail
Example:
RP/0/RSP0/CPU0:router# show igmp snooping
Attaching a Profile and Activating IGMP Snooping on a Bridge Domain
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Purpose
Enters Layer 2 VPN configuration mode.
Enters Layer 2 VPN VPLS bridge group configuration
mode for the named bridge group.
Enters Layer 2 VPN VPLS bridge group bridge domain
configuration mode for the named bridge domain.
Attaches the named IGMP snooping profile to the bridge
domain, enabling IGMP snooping on the bridge domain.
(Optional) Verifies that IGMP snooping is enabled on a
bridge domain and shows the IGMP snooping profile names
attached to bridge domains and ports.
23