Cisco ASR 9000 Series Configuration Manual page 126

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
Profile 11 : Rosen-PIM/GRE with BGP C-multicast Routing
These are the characteristics of this profile:
• PIM-trees in the core, data encapsulation is GRE, BGP C-multicast Routing.
• Static config of (S,G) required on Head-end PE.
• For PIM-SSM core-tree and PIM-SM core-tree with no spt-infinity, all UMH options are supported.
• For PIM-SM core-tree with spt-infinity case, only SFS (Highest PE or Hash-of-BGP-paths) is supported.
Hash of installed-paths method is not supported.
• Default and Data MDTs supported.
• Customer traffic can be SM or SSM .
• Inter-AS Option A supported. Options B and C not supported.
• All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide .
Profile 12 : Rosen-mLDP-P2MP with BGP C-multicast Routing
These are the characteristics of this profile:
• Full mesh of P2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RPL-Tail-end-Extranet supported.
• Inter-AS Option A, B and C supported.
• All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide .
Profile 13 : Rosen-mLDP-MP2MP with BGP C-multicast Routing
These are the characteristics of this profile:
• Single MP2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.
• Only SFS (Highest PE or Hash-of-BGP-paths) is supported. Hash of Installed-paths method is not
supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RIB-Tail-end-Extranet, RPL-Tail-end-Extranet supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A, B and C supported. For Options B and C, Root has to be on a PE or the roor-address
reachability has to be leaked across all autonomous systems.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
112
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software