Detaching A Profile And Deactivating Igmp Snooping On A Bridge Domain - Cisco ASR 9000 Series Configuration Manual

Detaching a Profile and Deactivating IGMP Snooping on a Bridge Domain

Command or Action
bridge-domain detail
Step 8
show l2vpn bridge-domain detail
Example:
RP/0/RSP0/CPU0:router# show l2vpn bridge-domain
Detaching a Profile and Deactivating IGMP Snooping on a Bridge Domain
To deactivate IGMP snooping on a bridge domain, remove the profile from the bridge domain using the
following steps.
A bridge domain can have only one profile attached to it at a time.
Note
SUMMARY STEPS
1. configure
2. l2vpn
3. bridge group bridge-group-name
4. bridge-domain bridge-domain-name
5. no igmp snooping
6. commit
7. show igmp snooping bridge-domain detail
8. show l2vpn bridge-domain detail
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
24
Implementing Layer-2 Multicast with IGMP Snooping
Purpose
(Optional) Verifies that IGMP snooping is implemented
in the forwarding plane (Layer 2) on a bridge domain.
Purpose
Enters Layer 2 VPN configuration mode.