Configuring Group Limit - Cisco ASR 9000 Series Configuration Manual

Implementing Layer-2 Multicast with IGMP Snooping
Command or Action
Step 2
route-policy policy-name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy sky
Step 3
end-policy
Example:
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
Step 4 commit

Configuring group limit

SUMMARY STEPS
1. configure
2. igmp snooping profile profile-name
3. group policy policy-name
4. group limit range
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
igmp snooping profile profile-name
Example:
RP/0/RSP0/CPU0:router(config)# igmp snooping profile
name1
Step 3
group policy policy-name
Example:
RP/0/RSP0/CPU0:router(config-igmp-snooping-profile)#
group policy policy1
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Configuring Group Limits
Purpose
Configures route policy with the defined
name.
Ends the route-policy configuration.
Purpose
Enters IGMP snooping profile configuration mode
and creates a new profile or accesses an existing
profile.
Specifies the configured route-policy to set the
group weight.
35