Cisco ASR 9000 Series Configuration Manual page 65

Implementing Layer-2 Multicast with IGMP Snooping
!
!
!
mpls ldp
router-id 30.30.30.30
graceful-restart
interface GigabitEthernet0/0/0/1
!
interface GigabitEthernet0/0/0/8
!
!
3 Configure an MCLAG bundle towards DHD:
interface Bundle-Ether10
description interface towards DHD
lacp switchover suppress-flaps 100
mlacp iccp-group 1
mlacp switchover recovery-delay 60
mlacp port-priority 2
mac-address 0.aaaa.1111
bundle wait-while 0
l2transport
!
!
interface GigabitEthernet0/0/0/28
bundle id 10 mode active
!
4 Configure redundancy group for MCLAG:
redundancy
iccp
group 1
mlacp node 2
mlacp system mac 0000.aaaa.0000
mlacp system priority 1
member
neighbor 20.20.20.20
!
backbone
interface GigabitEthernet0/0/0/8
!
!
!
5 Configure IGMP Snooping profile:
igmp snooping profile p1
ttl-check disable
router-alert-check disable
!
6 Enable IGMP Snooping in the L2VPN BD which includes MCLAG bundle towards DHD and PW towards
PE:
l2vpn
bridge group bg1
bridge-domain bg1_bd1
igmp snooping profile p1
interface Bundle-Ether10
!
vfi bg1_bd1_vfi
neighbor 40.40.40.40 pw-id 1
!
!
!
!
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Configuring IGMP Snooping over MCLAG: Example
51