Deactivating Mld Snooping On A Bridge Domain - Cisco ASR 9000 Series Configuration Manual

Implementing MLD Snooping
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Step 3 bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group
GRP1
Step 4 bridge-domain bridge-domain-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg)#
bridge-domain ISP1
Step 5 mld snooping profile profile-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# mld
snooping profile default-bd-profile
Step 6
commit

Deactivating MLD Snooping on a Bridge Domain

To deactivate MLD snooping from a bridge domain, remove the profile from the bridge domain using the
following steps:
A bridge domain can have only one profile attached to it at a time.
Note
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Deactivating MLD Snooping on a Bridge Domain
Purpose
Enters Layer 2 VPN configuration mode.
Enters Layer 2 VPN VPLS bridge group configuration
mode for the named bridge group.
Enters Layer 2 VPN VPLS bridge group bridge domain
configuration mode for the named bridge domain.
Attaches the named MLD snooping profile to the bridge
domain, enabling MLD snooping on the bridge domain.
61