Creating A Mld Snooping Profile - Cisco ASR 9000 Series Configuration Manual

Implementing MLD Snooping
Table 9: Multicast Traffic Handling for a MLDv2 Querier
Traffic Type
IP multicast source traffic
MLD general queries
MLD group-specific queries
MLDv1 joins
MLDv2 reports
MLDv1 leaves

Creating a MLD Snooping Profile

SUMMARY STEPS
1. configure
2. mld snooping profile profile-name
3. Optionally, add commands to override default configuration values.
4. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 mld snooping profile profile-name
Received on MRouter Ports
Forwards to all mrouter ports and
to host ports that indicate interest.
Forwards to all ports.
If received on the querier port
floods on all ports.
Handles as MLDv2 IS_EX{}
reports.
• If proxy reporting is
enabled—For state changes
or source-list changes,
generates a state change
report on all mrouter ports.
• If proxy reporting is
disabled—Forwards on all
mrouter ports.
Handles as MLDv2 IS_IN{}
reports.
Purpose
Enters MLD snooping profile configuration mode and creates a named profile.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Creating a MLD Snooping Profile
Received on Host Ports
Forwards to all mrouter ports and
to host ports that indicate interest.
—
—
Handles as MLDv2 IS_EX{}
reports.
• If proxy reporting is
enabled—For state changes
or source-list changes,
generates a state change
report on all mrouter ports.
• If proxy reporting is
disabled—Forwards on all
mrouter ports.
Handles as MLDv2 IS_IN{}
reports.
59