Cisco ASR 9000 Series Configuration Manual page 12

Contents
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
xii
Configuring IGMP VRF Override
Specifying VRF definition
Enabling Multicast Routing on default and non-default VRFs
Configuring an Interface for a Non-default VRF Instance
Configuring route-policy
Associating a route policy to PIM configuration for the VRF receiving IGMP reports
Configuration Examples for Implementing Multicast Routing on Software
DNS-based SSM Mapping: Example
Calculating Rates per Route: Example
Preventing Auto-RP Messages from Being Forwarded on Software: Example
Inheritance in MSDP on Software: Example
MSDP-VRF: Example
255
MoFRR Provider Edge Configuration: Example
Configuring Route Policy for Static RPF: Example
Configuring IPv4 Multicast VPN: Example
Configuring MVPN to Advertise Routes Between the CE and the PE Using OSPF:
Example 256
Configuring MVPN to Advertise Routes Between the CE and the PE Using BGP:
Example
261
Configuration Examples for MVPN Profiles
Configuration Examples for Inband mLDP profiles
Configuration Examples for P2MP-TE profiles
Configuration examples for Partitioned mLDP profiles
Configuration Examples for Rosen-mGRE profiles
Configuration Examples for Rosen mLDP profiles
Configuration Examples for multicast support on PW-HE
Configuring MVPN Extranet Routing: Example
Configuring the Source MVRF on the Receiver PE Router: Example
Configuring the Receiver MVRF on the Source PE Router: Example
Configuring Multicast Hub and Spoke Topology: Example
Hub and Spoke Non-Turnaround Configuration: Example
Hub and Spoke with Turnaround: Example
Configuring LSM based MLDP: Examples
Additional References 306
248
248
251
252
253
254
256
256
256
265
266
276
289
296
249
250
252
254
265
268
271
272
275
276
278
281
281
252