Configuring Immediate-Leave - Cisco ASR 9000 Series Configuration Manual

Configuring Immediate-Leave

Configuring Immediate-Leave
To add the IGMP snooping immediate-leave option to an IGMP snooping profile, follow these steps.
Before You Begin
IGMP snooping must be enabled on the bridge domain for port-specific profiles to affect IGMP snooping
behavior.
SUMMARY STEPS
1. configure
2. igmp snooping profile profile-name
3. immediate-leave
4. commit
5. show igmp snooping profile profile-name detail
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
igmp snooping profile profile-name
Example:
RP/0/RSP0/CPU0:router(config)# igmp snooping profile
host-port-profile
Step 3
immediate-leave
Example:
RP/0/RSP0/CPU0:router(config-igmp-snooping-profile)#
immediate-leave
Step 4
commit
Step 5 show igmp snooping profile profile-name detail
Example:
RP/0/RSP0/CPU0:router# show igmp snooping profile
host-port-profile detail
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
30
Implementing Layer-2 Multicast with IGMP Snooping
Purpose
Enters IGMP snooping profile configuration mode
and creates a new profile or accesses an existing
profile.
Enables the immediate-leave option.
• If you add this option to a profile attached to a
bridge domain, it applies to all ports under the
bridge.
• If you add this option to a profile attached to a
port, it applies to the port.
(Optional) Displays the configuration settings in the
named profile.