Cisco ASR 9000 Series Configuration Manual page 281

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
static-group 227.101.1.1 101.7.1.1
!
!
Profile-18: Rosen Static P2MP-TE with BGP-AD and PIM signaling
multicast-routing
mdt source Loopback0
vrf v181
address-family ipv4
mdt default p2mp-te static tunnel-mte18
interface all enable
bgp auto-discovery pim
!
address-family ipv6
mdt default p2mp-te static tunnel-mte181
interface all enable
bgp auto-discovery pim
!
!
router pim
vrf v181
address-family ipv4
rpf topology route-policy p2mp-te-default
!
address-family ipv6
rpf topology route-policy p2mp-te-default
!
!
route-policy p2mp-te-default
set core-tree p2mp-te-default
end-policy
!
Profile-16: Rosen Static P2MP-TE with BGP-Ad and BGP signaling
!
multicast-routing
mdt source Loopback0
vrf v161
address-family ipv4
mdt default p2mp-te static tunnel-mte16
interface all enable
bgp auto-discovery pim
!
address-family ipv6
mdt default p2mp-te static tunnel-mte161
interface all enable
bgp auto-discovery pim
!
!
router pim
vrf v161
address-family ipv4
rpf topology route-policy p2mp-te-default
mdt c-multicast-routing bgp
!
address-family ipv6
rpf topology route-policy p2mp-te-default
mdt c-multicast-routing bgp
!
!
route-policy p2mp-te-default
set core-tree p2mp-te-default
end-policy
!
Profile-20: Default MDT - P2MP-TE - BGP-AD - PIM
multicast-routing
mdt source Loopback0
vrf p20_vrf1
address-family ipv4 unicast
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 6.0.x
Configuration Examples for MVPN Profiles
267