Deleting Programs; Program Button - Beckman Coulter Avanti JXN-26 User Manual

Programs

Deleting Programs

2
Select the program you want to edit and select the
that selection will be cleared. If the program is running, the
3
On the
button.
4
On the
), then select the
Temp
changes and return to the previous page.
5
On the
modify each set of parameters. Then select
Deleting Programs
You can delete any program that is not currently running.
NOTE
If Require Login is enabled, only an Administrator or Super User may delete a program.
1
On the
Figure 5.12 Program Button
2
On the
button.
3
The system displays a confirmation message. Select
cancel the deletion.
NOTE
A deleted program name cannot be reused.
5-8
page, select the numbered step you want to edit, then select the
Edit Program
page, select each button you want to modify (
Edit Step
button and enter the new parameters. Select
Clear
page, you can select the
Edit Program
page, select
Home Program
page, select the program you want to delete, then select the
Select Program
button. If the program is selected to run,
Edit
button and/or the
Accel Decel
.
Save
from the side menu.
to delete the program, or select
Yes
button will be disabled.
Edit
Edit Step
, , and
Set Speed Set Time
to save the
OK
button, and
Rotor
Delete
PN B38322AA
Set
to
No