Set Speed Ω²T Time Page - Beckman Coulter Avanti JXN-26 User Manual

Avanti jxn series high performance centrifuges for in vitro diagnostic use
Hide thumbs Also See for Avanti JXN-26:
Table of Contents

Advertisement

Functional Pages
Set Speed ω²t Time Page
Set Speed ω²t Time Page
Figure 6.7 Set Speed ω²t Time Page
When the ω²t mode is active and you select either the
the
Home Page
computed from the time and RPM (or RCF) values you enter. Use this page to set the values for the
next run that produce the desired ω²t value.
Use the
ω²t Mode
In addition to the Header Bar and the Footer Bar, the
elements:
• The
Set Speed
a new speed value. The system then changes the ω²t or time value, whichever you entered last,
to reflect the new speed value.
• The
Set ω²t Display
value. The time then changes to reflect the new ω²t value.
• The
Set Time
button to set a new time value. The ω²t value then changes to reflect the new time value.
• Use the
• The
Select Rotor
• The keypad changes slightly depending on the value you are entering. For setting time, you can
use the Hold key to set the time to a hold state with no countdown to an automatic end. For
Display/Button setting ω²t, use the decimal and e keys to enter values in exponential notation.
You can use the
• The Delay Start button displays the
• The
Cancel
• The
OK
6-10
or the Footer Bar, the system displays the
button on
The Basic Tab
Display/Button shows the current Speed in RPM or RCF. Select this button to set
/Button shows the current ω²t value. Select this button to set a new ω²t
Display/Button shows the current time setting in hours and minutes. Select this
button to select the speed units. You must have a rotor selected to use RCF.
RPM/RCF
button displays the
and
keys to make corrections.
Clear
Back
button discards your changes and dismisses the page.
button accepts your changes and dismisses the page.
Set Speed
Set Speed ω²t Time
of the
System Options Page
Set Speed ω²t Time
Select Rotor Page
(Library).
Delay Start
Page.
button or the
button on
Set Time
page. The ω²t value is
to enable or disable ω²t mode.
page contains the following
PN B38322AA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avantii jxn-30

Table of Contents