Functional Pages
Set Speed Page
Set Speed Page
Figure 6.3 Set Speed Page (Rotor Selected)
To set the speed for the next run or change the speed of the run in progress, select the
Display/Button on the
the
RPM RCF
If the instrument is in w²t mode, the system displays the
In addition to the Header Bar and the Footer Bar, the
elements:
• The Set Speed Display at the top of the page shows the current Set Speed in RPM or RCF. The
last digit is always zero.
• The keypad changes the speed setting. You can use the
• The
RPM/RCF
• The
Select Rotor
• The
Cancel
• The
OK
6-6
Home Page
or the Footer Bar to display the
button to set the value in RCF (Relative Centrifugal Field) instead of RPM.
button selects the speed units. This button is disabled until a rotor is selected.
button displays the
button discards your changes and dismisses the page.
button saves your entry and dismisses the page.
Set Speed ω²t Time
page contains the following
Set Speed
and
Clear
Select Rotor Page (Library)
Set Speed
page. You can select
Set Speed
Page.
keys to make corrections.
Back
page.
PN B38322AA