Max Temperature Offset Page
Figure 6.39 Max Temperature Offset Page
Select the
Max Temperature Offset
Max Temperature Offset
during a run. Once the tolerable deviation above the set temperature has been selected, the user can
specify whether the run should shut down or continue if the overtemp setting is reached by using
the
Max Temperature Shutdown
In addition to the Header Bar and the Footer Bar, the
following elements:
• The
Tolerable Deviation Above the Set Temperature
Celsius. The system default is 4°C.
• Use the keypad to change the setting. You can use the
• The
Cancel
• The
OK
PN B38322AA
button on the Basic tab of the
page. Use this page to set the tolerable deviation above the set temperature
button on the Basic tab of the
button discards your changes and dismisses the page.
button accepts your changes and dismisses the page.
Max Temperature Offset Page
System Options Page
System Options
page contains the
Max Temperature Offset
page shows the current setting in degrees
and
keys to make corrections.
Clear
Back
6
Functional Pages
to display the
Page.
6-37