Selecting A Printer; Setting Up Email - Beckman Coulter Avanti JXN-26 User Manual

Configuration
Managing Your Network
5
DHCP Mode
configures the IP addressing parameters using a DHCP Server on the network.
If your network administrator provides a specific IP address, disable DHCP mode and enter the
values provided for the following fields:
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
To disable DHCP Mode, select
6
Select
Save

Selecting a Printer

Use this option to select a USB or network printer for the instrument. The system automatically
sends all print requests to the selected printer.
NOTE
Printer drivers must be installed by your Beckman Coulter Representative.
1
Select the
2
Select
Options
3
Select the
the available printers.
4
Select a printer from the list. You can select
5
Select
Save

Setting Up Email

Use this option to configure email that can be sent from the instrument. The instrument will send
diagnostic notifications to the email account of all users with an email address entered in their user
profile.
4-2
(Dynamic Host Configuration Protocol) is enabled by default and automatically
Enable
to save the network information and return to the
Button on the Header Bar to display the
Menu
to display the
System Options
Tab, then select
Network
to save the printer selection and return to the
so that the green square is cleared.
Menu
page.
to display the
Select Printer
to send a test page to the printer.
Test Print
System Options
page.
System Options
page.
page, which lists
Select Printer
page.
PN B38322AA