Setup Email Page - Beckman Coulter Avanti JXN-26 User Manual

Functional Pages

Setup Email Page

Setup Email Page

Figure 6.53 Setup Email Page
Select the
Setup Email
page. Use this page to configure settings for email sent from the instrument. When email is
Email
configured, the instrument sends diagnostic notifications to all users with email addresses defined
in their user profiles.
In addition to the Header Bar and the Footer Bar, the
elements:
• Select the
address and return to the Setup Email page.
• The
Port Number
•
User Name
fields to enter the required values, then select
•
Email From
instrument. You can change the default to a legitimate or fictitious address, depending on your
requirements. Select the field to enter the new address, then select
return to the Setup Email page.
• Select the SSL Server
displays a green square when the option is enabled.
• You can select
address and select
a status message for the success or failure sending the test email. The email may still not be
delivered to the specified recipient.
• The
Cancel
6-50
button on the Network tab of the
field to enter your email server name or address. Select
SMTP Server
field defaults to 25. Do not change it unless required by your email server.
and are optional, but may be required by your email server. Select the
Password
defines the return email address that appears on email notifications sent by the
button to enable email encryption, if necessary. The button
Enable
to send an email to test your configuration. Enter the recipient email
Test Email
to send the email and return to the Setup Email page. The system displays
OK
button discards your changes and returns to the
System Options Page
page contains the following
Setup Email
to return to the Setup Email page.
OK
to save the address and
OK
System Options
to display the
Setup
to save the
OK
Page.
PN B38322AA