Setting Up Vnc - Beckman Coulter Avanti JXN-26 User Manual

1
Select the
2
Select
Options
3
Select the
4
Select
SMTP Server
to the
Setup Email
5
Port Number
6
User Name
fields to enter the required values, then select
7
Email From
instrument. You can change the default to a legitimate or fictitious address, depending on your
requirements. Select the field to enter the new address, then select
return to the
8
Select the SSL Server
server. The button displays a green square when the option is enabled.
9
You can select
address and select
a status message for the success or failure sending the test email.
10
When you have completed your configuration, select

Setting Up VNC

Use VNC (Virtual Network Computing) to connect to the instrument from a laptop or other remote
device.
1
Select the
PN B38322AA
button on the Header Bar to display the
Menu
to display the
System Options
Tab, then select
Network
to enter your email server address. Select
page.
defaults to 25. Do not change it unless you must use another, specific port number.
and are optional, but may be required by your email server. Select the
Password
defines the return email address that appears on email notifications sent by the
page.
Setup Email
button to enable email encryption, if required by your email
Enable
to send an email to test your configuration. Enter the recipient email
Test Email
to send the email and return to the
OK
Button on the Header Bar to display the
Menu
Menu
page.
to display the
Setup Email
to return to the
OK
Setup Email
to return to the
Save
Menu
Configuration
Managing Your Network
page.
page.
Setup Email
to save the address and return
OK
page.
Setup Email
to save the address and
OK
page. The system displays
System Options
page.
4
page.
4-3