Using the JCF-Z Continuous Flow/Zonal Rotor
Zonal Bracket Kits
A special bracket and mounting hardware are required when the JCF-Z Continuous Flow/Zonal
Rotor is used. These parts are contained in the Zonal Bracket Kit. The Zonal Bracket Kit includes a
bracket, mounting hardware, and assembly instructions. This kit is for use with Cole-Parmer tubing
size 16 (6.4 mm [
Two additional kits are available, one which contains adapters for size 14 tubing (4.8 mm [
O.D.) and one which contains adapters for size 15 tubing (9.6 mm [
use either of these sizes of tubing, you will need to purchase one of these kits in addition to the
basic kit.
See
Table 7.1
Kit contents.
PN B38322AA
1
/4-in.] O.D.), the tubing size most commonly used with the JCF-Z rotor.
in
CHAPTER 7, Maintenance and Troubleshooting
Preinstallation Requirements
Using J2 Series Rotors in the Avanti JXN Series
3
/8-in.] O.D.). If you wish to
for a complete list of Zonal Bracket
A
3
/16-in.]
A-7