Action
5. After the rotor has stopped,
press [
].
DOOR
6. Remove the rotor. Keep the
chamber door closed
between runs.
RECALLING, CHANGING, OR DELETING A PROGRAM
Recalling a Program
Action
1. Press [
] and the appro-
PROG
priate keypad number.
2. Press [
] repeatedly until
STEP
the number of the selected
step is displayed.
3. To begin the run, press
[
] and [
ENTER/DISPLAY
Changing a Program
Action
1. Press [
] and the appro-
PROG
priate keypad number.
Result
The door is unlocked and the chamber vented.
A program that has been saved in memory can be recalled at
any time.
Result
The first step in the program is displayed.
Run parameters for the designated step are displayed for 5 seconds.
The run starts with step 1 and continues through all saved steps.
].
START
Result
The first step in the program is displayed.
Operation
3-13