Operations
Manual Operation
Setting the Speed and Rotor
1
Select the
Figure 3.4 Select Rotor
2
Select the rotor for the run from the library. If the desired rotor is not in the library, a system
Administrator or Super User must add it.
3
Select the
4
If you plan to set the speed in units of relative centrifugal field (RCF), select the
Note that the RPM/RCF button is only enabled when you have selected a rotor.
5
Use the keypad to set the desired speed. Note that the speed is set in 10-rpm (or x g when
entering RCF) increments, with a zero added to your number. You can also use the
keys to make corrections.
Clear
6
Select the
Step 3: Set the Acceleration and Deceleration Profiles
Select the
Accel and Decel
3-4
Button to go to the
Select Rotor
Button to return to the
OK
key to accept your entry and dismiss the page.
OK
Display/Button to go to the
Page.
Select Rotor
Page.
Set Speed
Set Acceleration/Deceleration Profiles
Button.
RPM/RCF
and
Back
Page.
PN B38322AA