Running Programs; New Step In A Numbered Sequence - Beckman Coulter Avanti JXN-26 User Manual

Programs

Running Programs

a. Select the
speed must be at least 500 RPM up to the maximum speed for the selected rotor. If you plan
to set the speed in units of relative centrifugal field (RCF), select the
NOTE
b. Select the
be between 1 minute and 99 hours 59 minutes.
c. Select the
d. When the parameters for Speed, Time, and Temperature are set, select
and return to the
8
The new step appears in a numbered sequence for the run. From this point, more steps can be
added to the run, edited, or deleted using the
Figure 5.9 New Step in a numbered sequence
9
Select
Save
Running Programs
NOTE
If Require Login is enabled, the user needs to be authorized to run the programs. Users will only be
able to see the programs they are authorized to run.
5-6
button at the top of the page, then use the keypad to set the speed. The
Set Speed
The RPM/RCF button is only enabled when you have selected a rotor.
button, then use the keypad to set the time range. The run time must
Set Time
button, then use the keypad to set the temperature.
Set Temp
page.
New Program
to store the program.
, , and
New Step Edit Step Delete Step
button.
RPM/RCF
to save the step
OK
buttons.
PN B38322AA