Enabling Api; Managing Users - Beckman Coulter Avanti JXN-26 User Manual

Configuration

Managing Users

2
Select
Options
3
Select the
4
Select the Enable or Disable VNC Server
displays a green square when the option is enabled.
5
To use the PIN of the current user as the VNC password, select the Synchronize VNC Password
To Logged in User PIN
Enter and confirm the password and select
6
Select
Back

Enabling API

Use this option to allow a remote device to connect to the instrument using the API.
1
Select the
2
Select
Options
3
Select the
option is enabled.
NOTE
This button is only active when Require Login is enabled and you are logged into the system as
an Administrator.
4
Select
Done
Managing Users
You can require users to log in prior to using the Avanti JXN series. You can use the login to build a
run log for each user, and to control access to the system.
The system includes three user levels that grant different ranges of system access.
4-4
to display the
System Options
Tab, then select
Network
button. To enter a separate VNC password, select
Enable
to return to the
System Options
Button on the Header Bar to display the
Menu
to display the
System Options
Tab, then select
Network
to return to the page.
Home
page.
to display the
Setup VNC
button to enable the VNC server. The button
Enable
to save and return to the
OK
page.
Menu
page.
. The button displays a green square when the
Enable API
page.
Setup VNC
Set Password
page.
Setup VNC
page.
PN B38322AA
.