Ping - Dell PowerConnect 7000 Series Reference Manual

Example
console(config)#nsf

ping

Use the ping command in User EXEC mode to check the accessibility of the
desired node on the network.
Syntax
ping [ ip | ipv6 ]
size
size ]
ipaddress — IP address to ping (contact).
•
hostname — Hostname to ping (contact). (Range: 1–158 characters). The
•
command allows spaces in the host name when specified in double quotes,
even though host names may only consist of letters, numbers and the
hyphen character.
count — Number of packets to send (Range: 1–15 packets).
•
interval — The time between Echo Requests, in seconds (Range: 1–60
•
seconds).
size — Number of data bytes in a packet (Range: 0–65507 bytes).
•
Default Configuration
The default count is 4.
The default interval is 3 seconds.
The default size is 0 data bytes.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
ipaddress hostname
|
count
[ repeat
System Management Commands
interval
] [ timeout ] [
1593