Show Sflow Sampling - Dell PowerConnect 7000 Series Reference Manual

Poller
Data Source
-----------
1/0/1

show sflow sampling

Use the show sflow sampling command to display the sFlow sampling
instances created on the switch.
Syntax
rcvr-index
show sflow
interface-list
]
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interface-list — The list of interfaces on which data is sampled.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Sampler Data
Source
Receiver Index
Packet Sampling
Rate
Max Header Size
1516
Sflow Commands
Receiver
Index
-------
1
sampling [{gigabitethernet | tengigabitethernet}
The sFlowDataSource (unit/slot/port) for this sFlow sampler.
This agent will support Physical ports only.
The sFlowReceiver configured for this sFlow sampler.
The statistical sampling rate for packet sampling from this
source.
The maximum number of bytes that should be copied from a
sampled packet to form a flow sample.
Poller
Interval
-------
0