Dell PowerConnect 7000 Series Reference Manual page 1618

Unit
Detected Code Version
Detected Code in Flash
Boot Code Version
Up Time
Example – All Units in the Stack
This example displays information about all units in the stack.
console>show switch
Switch Management
Status
-------------------------------------------------------------
1 Mgmt Switch
Different fields in the display are explained as follows:
Unit
Switch
Management Status
Preconfigured Model Identifier
1618
System Management Commands
Description
This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
This field displays the version of the boot
strapping code.
This field displays the system up time.
Preconfig Plugged-in
Model ID Model ID
PCM8024 PCM8024
Description
This field displays the unit identifier assigned to
the switch.
This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
Switch Code
Status Version
1.0.0.0