Macro Apply - Dell PowerConnect 7000 Series Reference Manual

Command Mode
Global Configuration mode
User Guidelines
This command is intended to give the administrator an easy way to remember
which macros have been applied globally. All text up to the new line is
included in the description. The line is appended to the global description.

macro apply

Use the macro apply command in Interface Configuration mode to apply a
macro.
Syntax
macro-name
macro apply
value
]
Parameter Description
Parameter
macro-name
parameter
value
Default Configuration
No parameters are substituted unless supplied on the command line.
Command Mode
Interface Configuration mode
User Guidelines
Commands applied are additive in nature. That is, they do not remove
existing configuration information by default.
1344
CLI Macro Commands
[parameter
Description
The name of the macro.
The name of the parameter recognized by the macro. The
parameter must begin with a dollar sign ($).
The string to be substituted within the macro for the specified
parameter name.
value
] [parameter
value
][parameter