Show Fiber-Ports Optical-Transceiver - Dell PowerConnect 7000 Series Reference Manual

Example
The following example displays the last TDR tests on all ports.
console#show copper-ports tdr
Port Result
---- --------
1/0/1 OK
1/0/2 Short
1/0/3 Test has not been performed
1/0/4 Open
1/0/5 Fiber

show fiber-ports optical-transceiver

Use the show fiber-ports optical-transceiver command in Privileged EXEC
mode to display the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [
interface — A valid Ethernet port. The full syntax is unit / port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The show fiber ports command is only applicable to the SFP combo ports and
XFP ports (not the ports on the SFP+ plug-in module).
1442
PHY Diagnostics Commands
Length [meters]
---------------
50
128
-
interface
Date
---------------
13:32:00 23 July 2004
13:32:08 23 July 2004
-
]