Set Description - Dell PowerConnect 7000 Series Reference Manual

set description

Use the set description command in Stack Global Configuration mode to
associate a text description with a switch in the stack.
Syntax
set description
unit — The switch identifier. (Range: 1–12)
•
description — The text description. (Range: 1–80 alphanumeric
•
characters)
Default Configuration
This command has no default configuration.
Command Mode
Stack Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 "unit 1"
slot
Use the slot command to configure a slot in the system. The unit/slot is the
slot identifier of the slot located in the specified unit. The
index to the database of the supported card types (see the command show
supported cardtype) indicating the type of card being preconfigured in the
specified slot. The card index is a 32-bit integer. If a card is currently present
in the slot that is unconfigured, the configured information will be deleted
and the slot will be reconfigured with default information for the card. The
supported card types are:
1596
System Management Commands
unit description
cardindex
is the