Name (Captive Portal) - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
web-id — The locale number (Range: Only locale 1 is supported)
•
Default Configuration
Locale 1 is configured by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
name (Captive Portal)
Use the name command to configure the name for a captive portal
configuration. Use the "no" form of this command to remove a configuration
name.
Syntax
cp-name
name
no name
cp-name — CP configuration name (Range: 1–32 characters).
•
Default Configuration
Configuration 1 has the name "Default" by default. All other configurations
have no name by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#name cp2
1316
Captive Portal Commands
Advertisement
Table of Contents
