Show Captive-Portal - Dell PowerConnect 7000 Series Reference Manual
Systems cli reference guide
Hide thumbs
Also See for PowerConnect 7000 Series:
- Stacking instructions (37 pages) ,
- Technical white paper (34 pages)
Table of Contents
Advertisement
no https port
port-num —The port number to monitor (Range: 1–65535).
•
Default Configuration
Captive portal only monitors port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#https port 1443
console(config-CP)#no https port
show captive-portal
Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
1310
Captive Portal Commands
Advertisement
Table of Contents
