Show Snmp Filters - Dell PowerConnect 7000 Series Reference Manual

show snmp filters

Use the show snmp filters command in Privileged EXEC mode to display the
configuration of filters.
Syntax
show snmp filters
filtername — Specifies the name of the filter. (Range: 1-30)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name
------------------- ----------------------------------
user-filter1
user-filter1
user-filter2
console # show snmp filters user-filter1
Name
------------------- ----------------------------------
1522
SNMP Commands
filtername
OID Tree
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
1.3.6.1.2.1.2.2.1.*.1
OID Tree
Type
Included
Excluded
Included
Type