Introduction - Planmeca ProMax 3D Mid User Manual

1

INTRODUCTION

User's Manual (2D)
This manual describes how to take 2D panoramic
exposures. Make sure that you are fully acquainted with
the appropriate radiation protection measures and these
instructions before you use the X-ray unit.
NOTE The software version is shown briefly on the control
panel when the X-ray unit is switched on. This manual
is valid for software version 2.7.6.0.r or later. This
software version is compatible with Romexis software
version 3.7.0.r or later.
NOTE Refer to the User's Manual for 3D imaging for details
on information displays and for any general advice
about the X-ray unit.
INTRODUCTION
Planmeca ProMax 3D Mid 1