Selecting Panoramic Program - Planmeca ProMax 3D Mid User Manual

CONTROL PANEL
5.3

Selecting panoramic program

X-ray units with 3D sensor and SmartPan license:
18 Planmeca ProMax 3D Mid
To select a panoramic program, touch the Prog. field on
the main display. The main display is the display that is
shown when the X-ray unit is switched on.
The Select program type display appears. Select program
type Pan.
NOTE The Select program type display will show all the
exposure programs that the X-ray unit features at the
moment. The X-ray unit can be upgraded with new
exposure programs, contact your dealer for further
information.
On the next display, select the panoramic program you
wish to use.
Refer to section 4.1 "Panoramic programs" on page 8 for
a more detailed description of the program types.
NOTE Program type Standard + TMJ is not available for X-ray
units with Dimax sensor.
When you have selected the program the main display
will be shown again.
X-ray units with Dimax sensor:
User's Manual (2D)