Selecting Sinus Program - Planmeca ProMax 3D Mid User Manual

5.5

Selecting sinus program

X-ray units with 3D sensor and SmartPan license:
User's Manual (2D)
To select a sinus program, touch the Prog. field on the
main display. The main display is the display that is
shown when the X-ray unit is switched on.
The Select program type display appears. Select program
type Sinus.
NOTE The Select program type display will show all the
exposure programs that the X-ray unit features at the
moment. The X-ray unit can be upgraded with new
exposure programs, contact your dealer for further
information.
On the next display, select the sinus program you wish to
use.
Refer to section 4.3 "Sinus programs" on page 12 for a
more detailed description of the program types.
When you have selected the program the main display
will be shown again.
CONTROL PANEL
X-ray units with Dimax sensor:
Planmeca ProMax 3D Mid 25