Selecting Temporomandibular Joint (Tmj) Program - Planmeca ProMax 3D Mid User Manual

CONTROL PANEL
5.3.4 Autofocus (AF) in panoramic programs
5.4

Selecting temporomandibular joint (TMJ) program

X-ray units with 3D sensor and SmartPan license:
22 Planmeca ProMax 3D Mid
NOTE Autofocus is an optional feature for X-ray units with
Dimax sensor.
interproximal and orthogonal panoramic programs.
NOTE Autofocus has to be activated on information display
i310 before you can start using it.
NOTE The layer light is disabled when Autofocus is switched
on.
NOTE If Autofocus is switched on (AF ON), DEC will be
automatically switched off for the first exposure (scout
image).
Touch the Autofocus field on the main display to switch
Autofocus on (AF ON) or off (AF OFF) for the exposure
you are going to take.
Autofocus adjusts the layer position automatically. The
function positions the image layer individually for each
patient based on the position and angle of the apices of
the upper central incisors.
The exposure will be taken in two stages and the C-arm
will move twice.
To select a temporomandibular joint (TMJ) program,
touch the Prog. field on the main display. The main
display is the display that is shown when the X-ray unit is
switched on.
It is available
X-ray units with Dimax sensor:
for standard,
User's Manual (2D)