Planmeca ProMax 3D Mid User Manual page 34

PREPARATIONS FOR EXPOSURE
Detaching sensor from C-arm
C-arm
electrical
connector
Sensor
Locking
knob
30 Planmeca ProMax 3D Mid
Push in the C-arm electrical connector button on the other
side. This will make the electrical connection between the
sensor and C-arm.
C-arm electrical
connector button
NOTE Do not remove the sensor during imaging process.
Push in the C-arm electrical connector. This will
disconnect the electrical connection between the sensor
and C-arm.
The locking knob can now be turned 180 degrees. This
will release the locking mechanism.
Carefully pull the sensor out.
User's Manual (2D)