Cleaning Tab; Cleaning Printheads - QuickLabel Kiaro! 200 User Manual

Cleaning Tab

Kiaro! 200 User Guide
Use the Cleaning tab to clean the printheads, prepare the printer for transport, and
prime the printheads. If you are using the Kiaro! 200D printer, use this tab to refresh ink.

Cleaning Printheads

If you suspect print quality issues related to banding, clogged nozzles, or printing
defects, you might want to initiate a cleaning.
Printhead cleaning cannot be done during a print job or if an error is occurring. When
cleaning is in progress, do not perform any other operation.
Note: Cleaning the printhead consumes ink. Clean the printhead only when
necessary.
The cleaning options discussed in this procedure are also available in the
of the Kiaro! 200 printer driver and the
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 200 > Kiaro! 200 Maintenance
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Cleaning
Cleaning menu of the Kiaro! 200 Status Monitor.
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Kiaro! 200 Maintenance Utility
Status tab
61