Checking The Included Parts - QuickLabel Kiaro! 200 User Manual

Quick Start Guide
4
3 Holding the black frame at the bottom of the printer, lift the printer to take it out from
the pallet base. Lift from the illustrated points. Do not hold the front side of the
printer.
Note: The printer can weigh up to 170 pounds (77 kilograms). Three persons are
required to lift the printer. Lift only by the black frame on the bottom of the printer.
Do not grasp any other part of the printer to lift it. Do not lift the unit by the print
engine. Attempting to lift the printer in an improper position can result in fall of the
printer or injury.
4 Place the printer on a horizontal table. Then remove all pieces of packing tape and
cushioning materials visible on the exterior of the printer.
5 If necessary, you can rotate the feet on the bottom of the frame to adjust the height
of each corner. Use these adjustments to keep the printer level.

Checking the Included Parts

Check to make sure the following items are included with the printer.
• Starter ink tanks (one for each color)
• Starter roll of labels
• AC power cable
• USB cable
• Quick Start Guide
• Installation CD
Kiaro! 200 User Guide