Turn On The Locate Button/Led Remotely (Oracle Ilom Web Interface); Control The Locate Button/Led Locally - Oracle X7-8 Service Manual

locator_indicator = Off
The value locator_indicator shows the status as either On or Off.
Turn On the Locate Button/LED Remotely (Oracle
ILOM Web Interface)
Before going to the server, you can activate the server Locate Button/LED indicator to help you
identify the server in the rack.
Log in to the service processor Oracle ILOM web interface.
1.
To log in, open a web browser and direct it using the IP address of the server SP. Log in as
root or a user with administrator privileges. See
Installation
The Summary Information page appears.
2. In the Actions section, verify that the Locate Button/LED indicator is off, and
then click the Turn On button.
3. Click OK.
The Locator indicator on the Summary Information page changes to indicate the status of the
Locate Button/LED indicator.

Control the Locate Button/LED Locally

If you are physically present at the server, use this procedure to turn off or to turn on the Locate
Button/LED indicator.
For button and indicator location information, see
Before You Begin
Panel" on page

Turn On the Locate Button/LED Remotely (Oracle ILOM Web Interface)

Guide.
60.
"Using Oracle ILOM" in Oracle Server X7-8
"Front Indicator Module (FIM)
Preparing for Service 121