Fspf Silent - HP 6125XLG Command Reference Manual

Syntax
fspf retransmit-interval value vsan vsan-id
undo fspf retransmit-interval vsan vsan-id
Default
The default setting is 5 seconds.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
value: LSR retransmission interval of the interface in seconds, in the range of 1 to 65535.
vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839.
Usage guidelines
The LSR retransmission interval specifies the time to wait for an LSR acknowledgement from the neighbor
before retransmitting the LSR.
Examples
# Configure the LSR retransmission interval for interface VFC 1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fspf retransmit-interval 10 vsan 4

fspf silent

Use fspf silent to disable FSPF for the interface in a specified VSAN.
Use undo fspf silent to enable FSPF for the interface in a specified VSAN.
Syntax
fspf silent vsan vsan-id
undo fspf silent vsan vsan-id
Default
FSPF is enabled on all interfaces.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839.
Usage guidelines
With FSPF enabled, an interface can participate in the SPF calculation. To avoid SPF calculations on an
interface, disable FSPF on the interface.
57