Using Network Function - Panasonic TY-FB12LC Operating Instructions Manual

Using Network Function
Note:
Tousethenetworkfunction,seteach"NETWORKSETUP"settingandmakesuretosetthe"CONTROL
I/FSELECT"to"LAN".(seepage4)
When"LAN"isset,powerindicatorislitorangewhentheslotpoweristurnedon,thenthepoweristurned
"OFF"withremotecontrol(stand-bystate)regardlessofthe"Slotpower"setting.
Fordetailsonthe"Slotpower"setting,refertotheOperatingInstructionsofthedisplayunit.
■
Example of Network Connection
COMPUTER
Ferritecore
(supplied)
Notes:
• LaytheLANcableawayfromotherconnectioncables(excludingthepowercord).
• Makesurethebroadbandrouterorhubsupports10BASE-T/100BASE-TX.
• Toconnectadeviceusing100BASE-TX,use"category5"LANcable.
• TouchingtheLANterminalwithastaticallychargedhand(body)maycausedamageduetoitsdischarge.
Do not touch the LAN terminal or a metal part of the LAN cable.
• Forinstructionsonhowtoconnect,consultyournetworkadministrator.
Securing the LAN cable (TH-85PF12U)
Note: In accordance with the Installation Instructions, secure the LAN cable so that it will not become
near the display unit.
■
Command Control
Network function of the unit can control the display in the same way as serial control from a network.
Supported commands
Commands used in the serial control are supported.
Fordetailsonserialcontrolcommands,refertotheOperatingInstructionsofthedisplayunit.
Note:
Consult your local Panasonic dealer for detail instructions on command usage.
Great user manuals database on
LAN cable
(notsupplied)
Less
than
10cm
Huborbroadbandrouter
When using a pedestal for the installation of the display, use a clamper
suppliedwiththedisplaytosecuretheLANcable.Forusewithanother
method of installation, refer to the corresponding Installation Instructions.
Clamper
Less
than
10cm
AUDIO P /C /R P /C
R R B
LAN COMPONENT/RGB IN
Ferritecore
(supplied)
Installing the Ferrite core
Pull back the tabs
(intwoplaces)
UserManuals.info
/B Y/G
B
Open
Wind the cable Press the cable
twice through and close
5