Removing The Rear Wheel - APRILIA Atlantic 300 Service Station Manual

ATLANTIC 300 i.e.
1. Complete wheel
2. Seeger
3. Bearing
4. Brake calliper and muffler supporting plate
5. Nut
CHECKS
Check according to the instructions on the sched-
uled maintenance table.
•
Rest the vehicle on its centre stand.
•
Turn the wheel manually towards on
direction and another.
•
Check that the wheel turns smoothly,
without obstacles and/or noise, other-
wise replace the bearings. .
•
If the wheel oscillates during rotation,
check the affected components.
•
If the wheel stops at the same point ev-
ery time after rotating it several times,
proceed with balancing.

Removing the rear wheel

•
Remove the exhaust.
•
Remove the rear mudguard.
•
Slide off the rear brake calliper, keep-
ing it linked to the oil pipe.
•
Undo and remove the screw «1».
Locking torques (N*m)
Muffler plate-engine fixing screw 25 ± 20% (18.5 ftlb)
Suspensions
SUSP - 211