APRILIA Atlantic 300 Service Station Manual page 112

Engine
Specific tooling
AP8140661 Lock wrench for clutch bell
Locking torques (N*m)
Transmission cover screws 11÷13 (8.1÷9.6 ftlb) Driven pulley shaft nut 54÷60 (39.9÷44.3 ftlb)
End gear
Removing the hub cover
- Empty the rear hub through the oil drainage plug.
- Remove the 7 flanged screws indicated in the
figure.
- Remove the hub cover and the relevant gasket.
Removing the wheel axle
- Remove the wheel axle with gear.
- Remove the intermediate gear.
ENG - 112
ATLANTIC 300 i.e.